Best Budget TIG Welder UK

If you wish to achieve top-notch welds with adequate structural integrity, then you need to bring home the perfect TIG welder. This becomes even more important if you are working on a project where it is mandatory to stick to industry codes and standards. While the market is filled with ‘n’ number of TIG welders, choosing one can be a challenge if you have a stringent budget to adhere to. To make things easier, we have listed six of the best TIG welders which can cater to all your on-job demands without blowing a hole in your wallet and some helpful buying tips.

Tips Of Choosing The Best TIG Welder

  • Simple and user-friendly designs are always preferred amongst TIG welders. Working on your projects becomes easier when your welders are accompanied with a foot pedal and accessible controls for regulating the amperage. This brings in greater versatility to the work done as you can easily weld a variety of materials. Working at low amperage improves crater filling and delivers better arc stability.
  • Your spectrum of operation gets further widened with a TIG welder which delivers both AC and DC output. It also becomes necessary to take a look at AC balance control as that will allow greater application versatility.
  • Working with thinner metals become more practical with a welder having heat control attributes. Choosing a device with high duty cycle will lengthen its performance time without overheating.
  • Hobbyists should refrain from purchasing a heavy-duty welder. But you can spend a little more to ensure that your performance doesn’t stay limited even after you learn the basics of TIG welding.

1. TIG ARC Welder Portable Inverter MMA MOSFET 240V / 160 amp DC Röhr HP-160L

1. TIG ARC Welder Portable Inverter MMA MOSFET 240V 160 amp DC Röhr HP-160L

Check Price on Amazon

Make your welding sessions more productive with the Röhr HP-160L which serves as the best blend of breakthrough technology and robust craftsmanship. Users are bound to feel delighted with the variety of accessories like a clipping hammer, earth clamp, mask and wire brush which is shipped along with the Röhr HP-160L welder.

Build

You can now weld to perfection with the Röhr HP-160L which is crafted using powder coated steel. The level of durability gets further enhanced by its orange coating which acts as a shield of protection from punctures that are a regular characteristic of factory setups.

Operation

This multi-use welder by Röhr can be used for welding carbon steel, stainless steel, copper and coloured metals. You can engage in TIG Argon Gas or MMA Arc welding with this 2-in-1 device whose lightweight design helps with easy portability.

Miscellaneous

Latest MOSFET technology adds to the compactness of this welder while delivering 85% efficiency. Electrical arc ignition is facilitated by Hot Start and the unit returns automatically to its pre-set voltage post ignition.

Features:

  • Premium quality construction adds to the durability of the Röhr HP-160L welder.
  • Comes backed with a warranty of 12 months offered by the manufacturer.
  • Thermal overload protection helps in preventing accidents whenever the welder gets over heated.
  • Operates at a duty cycle of 60%.
  • Lightweight design helps in its easy portability.
Pros
  • A cleaner weld starting point is ensured by its non-contact high-frequency ignition in TIG mode.

  • Accompanied with numerous accessories for catering to your welding needs.

  • Supports both TIG and MMA welding.

  • Latest MOSFET transistor delivers 85% efficiency.

  • Stable welding current paves the path for professional welds time and again.

Cons
  • Not accompanied with tungsten tips.

2. ARC TIG Welder Inverter Röhr WSME-250

2. ARC TIG Welder Inverter Röhr WSME-250

Check Price on Amazon

Revive your passion for steel sculpturing with the Röhr WSME-250 which is specially designed for sufficing the requirements of both new and experienced users. You can easily undertake house maintenance, vehicle fabrication and similar unconventional chores with this AC/DC welder.

Build

Durability becomes a big consideration while using a welder in a factory setup. You can be completely guaranteed of the same while using the Röhr WSME-250 which has a powder coated steel construction. The welder further comes coated in a durable orange paint to buffer it from regular wear and tear.

Operation

The 4-in-1″ portable functionality of the Röhr welder allows using the same for MMA Arc and Tig Argon gas welding. Its AC/DC and 2T/4T functions can produce neat welds while increasing the efficiency by 30% and dramatically reducing power consumption.

Miscellaneous

A MOSFET transistor delivers stable welding current to ensure a perfect weld time and again. The current automatically increases when the arc is shorter courtesy its ARC Force functionality. Hot Start, on the other hand boosts tension during the arc’s ignition for facilitating electrical arc ignition.

Features:

  • Operates at a 60% duty cycle to bring in greater efficiency.
  • Thermal overload protection keeps the welder buffered from overheating problems.
  • Powder coated steel construction adds to the durability of this welder.
  • Uses latest inverter technology which increases the efficiency by 30%.
  • Multi-use welder helps in catering to carbon steel, stainless steel, copper, aluminium and other coloured metals.
Pros
  • Accompanied with a 1.5m electric cord which helps with easy positioning of the welder.

  • A bag shipped with the TIG welder helps in carrying all the accessories around.

  • Welder comes with a variety of accessories like 3 ceramic cups, a cleaning brush, a welding mask, 1 blue collar and 3 collets.

  • Pulse function brings down the level of heat which helps in welding thin plates easily.

  • Intuitive interface helps in catering to the requirements of both DIY and experienced users.

Cons
  • Not accompanied with a foot pedal.

3. TIG Welder Sherman DIGITIG 200GD

3. TIG Welder Sherman DIGITIG 200GD

Check Price on Amazon

Take up a variety of projects with profound versatility by banking on the Sherman DIGITIG 200GD AC/DC welder which can reduce your electricity bills to a great extent. IGBT inverter transistor adds to the degree of efficiency so that you can weld acid resistant steel, stainless steel, mild steel and aluminium alloys to perfection.

Build

Dimensions of 45 x 20 x 42 cm and weight of 18 Kilograms makes the Sherman TIG welder a considerably bulky option. However, you can move it around with the ergonomic handle. A 3-meter cord accompanying the welder can help you while working around those difficult to reach spots.

Operations

The welding process becomes simplified by the variety of features which accompany this AC DC TIG welder. However, its USP lies in the fully adjustable PULSE welding which allows working on wide frequency settings while welding both thin and thick elements. Premium quality weld joint is guaranteed by its reliable AC inverter.

Miscellaneous

You can choose amongst the advanced features from the intuitive control panel of this AC DC TIG welder. Some examples are pulse duty, pulse frequency, post and pre gas flow delay, AC balance, AC frequency, downslope, upslope, end current, base current etc.

Features:

  • Comes with an English manual which lists down all the instructions of using this welder.
  • Greater comfort of use is guaranteed by its verified and reliable AC inverter.
  • Intuitive control panel of the AC DC TIG welder helps in choosing amongst its advanced features with greater ease.
  • Can be used for welding aluminium alloys, stainless steel, mild steel and acid resistant steel.
  • Fully adjustable PULSE welding offers a wide frequency range for working with thin to thick materials.
Pros
  • Comes with a provision of including a foot pedal.

  • Allows MMA or TIG welding of steel and non-ferrous materials such as aluminium.

  • IGBT inverter transistor technology brings in greater efficiency while reducing power consumption drastically.

  • Backed by a 2 years international warranty offered on the power source.

  • Accompanied with a dual standard electric plug which can be used with your electric socket.

Cons
  • Welder seems pretty bulky at 18 kg.

4. TIG ARC Welder Röhr HP-250PP

4. TIG ARC Welder Röhr HP-250PP

Check Price on Amazon

If you have vigorous work and project management requirements, then the Röhr HP-250PP can serve as your best ally. Röhr brings unparalleled knowledge and cutting-edge technologies to the table which can deliver some of the most advanced welding devices. Be it house maintenance, vehicle fabrication or other unconventional task, you can undertake it all with similar efficiency by banking on the Röhr HP-250PP welder.

Build

A powder coated steel build of this welder adds to its level of durability while making it well suited for being subjected to heavy-duty usage. At just 9kg, this welder feels lightweight enough for being moved around your factory area.

Operation

The latest inverter technologies used by this welder reduces its overall footprint dramatically while enhancing the efficiency level by 30%. A consistent power supply is produced by this Röhr model to guarantee a stable welding arc. You can bank on this multi-use welder for dealing with copper, carbon steel, stainless steel and other coloured metals.

Miscellaneous

The welder is shipped with a clipping hammer, earth clamp, mask and wire brush which can cater to the requirements of both DIY and experienced users. Thermal overload protections shuts-off the device and ceases all action until the welder cools down completely.

Features:

  • A cleaner weld starting point is ensured by its non-contact high-frequency ignition in TIG mode.
  • Hot Start function facilitates electrical arc ignition.
  • The unit returns automatically to its pre-set voltage post ignition.
  • MOFSET transistor guarantees top-notch performance.
  • Stable welding current ensures a perfect weld time and again.
Pros
  • Intuitive design can cater to the requirements of both DIY and experienced users.

  • Accompanied with a variety of accessories to help you get started with the welding work immediately.

  • Offers dual TIG and MMA output.

  • Operates at a duty cycle of 60%.

  • Comes back by a 12 months warranty to keep you protected against all manufacturing defects.

Cons
  • Does not come with any tungsten tips for the TIG torch which need to be purchased separately.

5. TIG Welder R-Tech Tig160FPP

5. TIG Welder R-Tech Tig160FPP

Check Price on Amazon

Enjoy mess free welding with the R-Tech Tig160FPP TIG Welder which can add to your degree of versatility. Siemens IGBT technology helps in increasing efficiency at the time of welding as you deal with different types of steel, copper and brass in a seamless manner.

Build

The heavy-duty build of the R-Tech TIG welder makes it well suited for being used in factory setups. A lightweight and portable build helps in undertaking fabrication and maintenance work easily. All neatly positioned buttons and connection ports help with easy adjustment of the knobs.

Operation

This feature rich TIG welder is powered to the core by Siemens IGBT technology which assists in working with the pulsing current. A cooling fan helps in maintaining the device temperature for preventing all overheating issues.

Miscellaneous

Weld a variety of steel, brass, titanium and copper by using this TIG welder in DC mode. It is shipped with a variety of accessories for bringing greater efficiency to the work done. You can even refer to the owner’s manual in the case of doubts.

Features:

  • Can weld metals with thickness of 5mm in single pass.
  • Pulse TIG welding helps in effective heat control into the weld pool.
  • Backed by 3 years collect and return UK warranty.
  • Accompanied with an earth lead, 4m WP17 Superflex TIG torch, mains cable, gas hose, MMA Lead, argon regulator, torch, consumables kit and an owner’s manual.
  • Comes with a foot pedal for bringing greater ease in its usage.
Pros
  • HF start helps in starting the arc easily.

  • Portable design makes it well suited for undertaking maintenance and fabrication work.

  • Can be used for welding different types of steel, copper and brass.

  • Operates at a duty cycle of 35% for TIG welding at 160A and MMA welding at 125A.

  • Cooling fan offers thermostatic protection to the welder.

Cons
  • At 18kg, the welder might seem a bit bulky.

6. 200AMPS TIG IGBT DC Inverter Welder

6. 200AMPS TIG IGBT DC Inverter Welder

Check Price on Amazon

Control heat with complete precision by bringing home the TIG welder by YQX which can help you undertake regular jobs of cutting heavy-duty metals. Such attributes make it well suited for being used for industrial and home setups.

Build

With dimensions of 350x210x140mm and weight of 4kg, this TIG welder can be easily branded as a compact and lightweight device which assists in moving it around easily. Its durable body comes coated in orange paint and features air vents both at the front and back for effective air dissipation.

Operation

The digital control panel design of the welder displays the correct amperage setting for matching the electrode diameter selected by pressing the knob. This feature is especially helpful for novice users. Professional settings assist in improving the welding quality through dual combination of Hot Start and ARC Force.

Miscellaneous

This generator friendly TIG welder is shipped along with a 2m earth lead, 3m LIFT TIG Torch and 2m MMA lead so that you can exercise greater versatility at the workspace.

Features:

  • LED amperage display helps in making out the stats easily.
  • Users can adjust the HOT START and ARC FORCE function.
  • Electrode diameter size can be selected during MMA welding by simply pressing the knob.
  • Supports ARC/ MMA/ STICK and LIFT TIG welding.
  • Operates at an output current range of 20-200A.
Pros
  • Comes backed by a warranty of 12 months.

  • Accompanied with a welding face mask, steel hammer, 2m MMA lead, 2m earth lead and a 3m Lift TIG torch.

  • Weighs just 4kg which assists in its easy portability.

  • Internal fan helps in keeping the TIG welder cool.

  • Backed by latest IGBT technology which enhances the efficiency by 70%.

Cons
  • Cannot weld aluminum and aluminum alloy.

Conclusion

TIG welders with AC capabilities allow working on delicate metals. You need to consider whether your area of action requires welding aluminium or magnesium welding. Otherwise, you can completely avoid these products and opt for more affordable choices. Before operating your welder, it becomes extremely important to consider its input voltage as incorrect ones can render your unit unusable. For staying on the safer side, you can opt for welders which work on both 110v and 220v.

Leave a Reply